Additives and Spare Comp B

 For use with Hardtop XP Jotun paint.

For use with Jotamastic 90 Standard and Aluminium Comp A Tins. 1 Litre

For use with Jotamastic 90 Standard and Aluminium Jotun Paints instead of the Standard Comp. B when substrate temperatures are under 10C.

Jotun Anti-skid is made up of aluminium oxide partcles. Apply as follows: Brush/roll/spray a coat of paint. Sprinkle a layer of anti-skid into the wet film using a sieve of the correct mesh size. When the paint is dry, brush off any loose particles and apply a second coat of paint. Coarse: Use 1.5 - 2.0 kg per 5 litres paint. Suitable for for Conseal Touch-Up, Hardtop HB, Jotamastic & Penguard to produce a very rough surface. Medium: Use 1.0 - 1.5 kg per 5 litres paint. Suitable for Conseal Touch-Up, Hardtop HB, Jotamastic & Penguard.  Fine: Use 0.75 - 1.0 kg per 5 litres paint. Suitable for Pilot 2, Pioner Topcoat, Hardtop AS & Hardtop XP. (Please note that the Jotun granules are sold by the kilogram and will be sent in a sealed bag. Orders of 3kg or more will be sent in the original tin.)

Component B tin for use with all Penguard Jotun paints.

Penguard Tow Temp Additive is an additive for improved low temperature curing of the following products: Penguard HB , Penguard Primer, Penguard Special. Add 2% (100ml per 5 litres or 0.4L per 20 litres) mixed. Typical use : Recommended when a faster curing or painting at lower substrate temperatures is desired. Sold in 0.4L tins