Hempel High Protect Two Part Epoxy Primer Paint - 750ml

Hempel High Protect Two Part Epoxy Primer (replacing GelProtect SFE200) is a two-component, solvent-free, high-build epoxy for osmosis protection and treatment. Easy to apply with good tolerance to environmental conditions. Forms a hard, tough, water-resistant coating. For use as a primer below the waterline on boats made of glass fibre or steel. Prevention and repair of osmotic blistering in the glass fibre both above and below the waterline. Available in Cream 24700 or Grey 13700
£29.16 (ex. VAT)

Choose your options

You'll earn 34 loyalty points with this purchase
Click here for the Technical Data Sheets
Click here for the Safety Data Sheets

DISCLAIMER: Due to colours possibly appearing differently on your screen, the colour examples below are shown as a reference only.

Code BLAKES-0000402
Weight 5kg
EAN 5709516011528
GTIN 5709516011528
MPN 35651
Finish High Gloss
Coverage 6.6m² per litre
Application Brush, Roller, Spray (Lay off)
Thinners Hempel Thinners 5 (DO NOT THIN)
Suitable For Below the Waterline
Substrates GRP, Steel
Paint Calculator

How much paint will you need?
Surface Area (Length x Width) (m2)         
Spreading rate(m2/L) 
No. of coats 

Calculated result: Litres in total

NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage
Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only

Customer reviews

Write a review