Conseal Touch-Up is a single pack, high build acrylic resin with a satin finish. Conseal can be applied directly to bare steel as a "one-coat" combined primer and topcoat. It can also be applied over a wide range of single pack and two-pack primers. Ideal for all steel new-build & maintenance jobs eg containers, railings, structural steels, vessel superstructure, refineries, warehouses etc.
NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only
Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel.
Solvent thinner. Recommended as a general purpose thinner for acrylic and chlorinated rubber paints and antifouling compositions. Thinners No 7 is the solvent base for the following paints:- Vinyguard 88, Conseal Touch Up, Pilot QD Primer, Pioner Topcoat, Seaforce 30, SeaQueen, SeaAlu, Mare Nostrum, NonStop
Jotamastic 87 is a two-pack surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating which may be applied in high film thickness.. It is available with different hardeners (component b) for varying substrate temperatures, Standard (Std) and Wintergrade (WG). This product is a part of a complete system which is certified not to spread flames.