Jotun Hardtop Flexi is a high solids, glossy two-pack flexible polyurethane coating with good gloss and colour retention. Hardtop Flexi can be used as a single product system direct to mild steel, stainless steel, galvanised steel or aluminium.
DISCLAIMER: Due to colours possibly appearing differently on your screen, the colour examples below are shown as a reference only. Please note that some orange and yellow colours may cost more due to the base required to mix them.
If your colour choice is one of those colours it will take you to a new page.
NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only
Penguard HB is a high build, two-pack pure epoxy primer that be used above and below the waterline. It has excellent adhesion to GRP and should be used when painting over the gelcoat for the first time. It is extremely water resistant and will help prevent osmosis and has excellent adhesion to steel, aluminium, bronze, wood (marine ply) and galvanised steel. Penguard HB adheres well to concrete and makes an excellent swimming pool paint when correctly applied directly on a rendered surface, and can also be used in tanks for potable water (drinking water) providing the correct guidelines are followed. Winter Note: Use Jotun Penguard Low Temperature Additive (see below) to enable curing at temperatures below 10C
Solvent thinner. Recommended thinner for polyurethane or similar paint products. Thinners No 10 is the solvent base for the following paints:- Hardtop AS, Hardtop XP, Hardtop Flexi, Hardtop HB. NOTE: Not for use with zinc sulphates
Jotamastic 87 is a two-pack surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating which may be applied in high film thickness.. It is available with different hardeners (component b) for varying substrate temperatures, Standard (Std) and Wintergrade (WG). This product is a part of a complete system which is certified not to spread flames.