Pilot II is a glossy single pack alkyd (oil based) topcoat recommended for use either over an existing oil based topcoat, or over Vinyguard Silvergrey 88 primer or Alkyd Primer. Pilot II can be used on steel, wood or GRP. It is available in almost any colour. Pilot II may be applied by brush or roller. For best results, apply using conventional air spray.
NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only
Solvent thinner. Recommended as a general use thinner for most conventional alkyd or oil based paints. Thinners No. 2 is the solvent base for some of the following paints: Alkyd Primer, Pilot II, Spontan Varnish
Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel.
Alkydprimer is an excellent single pack (oil) based primer undercoat suitable for Steel, Aluminium or Wood above the waterline. It is the recommended undercoat for use with Jotun Pilot 2 and can also used as a topcoat when a matt finish is required.