Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel. Available in both silvergrey colour and red-toned colour. The red-toned is ideal for when you are applying more than one coat of Vinyguard to your vessel as it will easily highlight what has already been painted and what needs to be painted.
DISCLAIMER: Due to colours possibly appearing differently on your screen, the colour examples below are shown as a reference only.
Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel.
silvergrey 7001 red tone 9019
Brand
JOTUN
Code
JOTUN-0400
Weight
5kg
Finish
Matt
Coverage
8m² per litre using brush or roller
Application
Brush, Roller, Conventional Spray, Airless Spray
Thinners
Thinners No. 7
Suitable For
Steel, Wood (Also tiecoat on Penguard HB for GRP and Aluminium)
EAN
7029350113683
GTIN
7029350113683
MPN
Viny88
Paint Calculator
How much paint will you need?
NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only
Solvent thinner. Recommended as a general purpose thinner for acrylic and chlorinated rubber paints and antifouling compositions. Thinners No 7 is the solvent base for the following paints:- Vinyguard 88, Conseal Touch Up, Pilot QD Primer, Pioner Topcoat, Seaforce 30, SeaQueen, SeaAlu, Mare Nostrum, NonStop
Pilot II is a glossy single pack alkyd (oil based) topcoat recommended for use either over an existing oil based topcoat, or over Vinyguard Silvergrey 88 primer or Alkyd Primer. Pilot II can be used on steel, wood or GRP. It is available in almost any colour. Pilot II may be applied by brush or roller. For best results, apply using conventional air spray.
Jotun Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention. Pioner Topcoat can be used over the top of Vinyguard, Jotamastic and Penguard range of primers. It is quick drying and suitable for use both internally and externally.
