Vinyl Primer is a quick drying, one-component modified vinyl primer/sealer pigmented with aluminium flakes for added water resistance. Vinyl Primer can be used both for underwater and topside areas. It is an excellent universal sealer, which can effectively seal correctly prepared, intact old antifouling systems. It also bonds well to fresh, uncured epoxy primers, whilst allowing antifoulings and other one-component coatings to bond onto it. Vinyl Primer can be used directly onto steel as primer used in alkyd and acrylic coating systems. Sold in 750ml and 2.5 Litre tins
Vinyl Primer is a quick drying, one-component modified vinyl primer/sealer pigmented with aluminium flakes for added water resistance. Vinyl Primer can be used both for underwater and topside areas. It is an excellent universal sealer, which can effectively seal correctly prepared, intact old antifouling systems. It also bonds well to fresh, uncured epoxy primers, whilst allowing antifoulings and other one-component coatings to bond onto it. Vinyl Primer can be used directly onto steel as primer used in alkyd and acrylic coating systems. Sold in 2.5 Litre tins
DISCLAIMER: Due to colours possibly appearing differently on your screen, the colour examples below are shown as a reference only.
silvergrey 7001 red tone 9019
Brand
JOTUN
Code
JOTUN-0401Z
Weight
2kg
Finish
Flat Gloss
Coverage
4.8m² per litre using brush or roller
Application
Brush, Roller, Conventional Spray, Airless Spray
Thinners
Thinners No. 7
Suitable For
Steel, Wood (Also tiecoat on Penguard HB for GRP and Aluminium)
MPN
VinylPrimer
EAN
7029351005222
GTIN
7029351005222
Paint Calculator
How much paint will you need?
NB: Porous surfaces and shapes (ie corrugated iron) will require more paint.
Spreading rate can be found in the Specifications Tab under Coverage Please note that due to varying factors such as method of application and
thickness of coats applied, this paint calculator is to be used as a rough guide only
Solvent thinner. Recommended as a general purpose thinner for acrylic and chlorinated rubber paints and antifouling compositions. Thinners No 7 is the solvent base for the following paints:- Vinyguard 88, Conseal Touch Up, Pilot QD Primer, Pioner Topcoat, Seaforce 30, SeaQueen, SeaAlu, Mare Nostrum, NonStop
Pilot II is a glossy single pack alkyd (oil based) topcoat recommended for use either over an existing oil based topcoat, or over Vinyguard Silvergrey 88 primer or Alkyd Primer. Pilot II can be used on steel, wood or GRP. It is available in almost any colour. Pilot II may be applied by brush or roller. For best results, apply using conventional air spray.
Jotun Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention. Pioner Topcoat can be used over the top of Vinyguard, Jotamastic and Penguard range of primers. It is quick drying and suitable for use both internally and externally.
