Primers

Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel.

Penguard HB is a high build, two-pack pure epoxy primer that be used above and below the waterline. It has excellent adhesion to GRP and should be used when painting over the gelcoat for the first time. It is extremely water resistant and will help prevent osmosis and has excellent adhesion to steel, aluminium, bronze, wood (marine ply) and galvanised steel. Penguard HB adheres well to concrete and makes an excellent swimming pool paint when correctly applied directly on a rendered surface, and can also be used in tanks for potable water (drinking water) providing the correct guidelines are followed. Winter Note: Use Jotun Penguard Low Temperature Additive (see below) to enable curing at temperatures below 10C

Alkydprimer is an excellent single pack (oil) based primer undercoat suitable for Steel, Aluminium or Wood above the waterline. It is the recommended undercoat for use with Jotun Pilot 2 and can also used as a topcoat when a matt finish is required.

Jotamastic 90 Aluminium is a two component, polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is aluminium pigmented for improved barrier effect. Jotamastic 90 give excellent corrosion protection in both salt and fresh water. It is available with different hardeners (component B) for varying substrate temperatures, Standard (Std) and Wintergrade (WG). If being applied by airless spray it is essential to thin the paint by up to 10% using Jotun Thinners 17

Jotamastic 90 is a two-component, polyamine cured epoxy mastic coating which is a surface tolerant, high solids, high build product. Fully tintable in a wide range of colours, it is specifically designed to provide lasting protection in high-corrosive environments and can be used as a primer, mid or top coat. It is available with different hardeners (component b) for varying substrate temperatures, Standard (Std) and Wintergrade (WG).

Penguard Clear Sealer is a two-pack, transparent epoxy sealer with excellent penetrating properties. It is recommended to be used as a sealer/primer on concrete and other masonry surfaces as part of a suitable protective coating system.

Epiphanes Marine Primer is a one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining all characteristics of separate substrate primers in one. Epifanes Multi Marine Primer offers excellent adhesion to wood, fibreglass, steel, stainless steel, aluminium, galvanized metal, copper and most other bare or painted substrates. Epoxy or Epoxy filler over Multi Marine is not recommended.

Hempel Epoxy Light Primer undercoat is a two component epoxy high build paint. It forms a hard tough coating resistant to water and petroleum products. It is recommended for use as a primer below and above the waterline on boats made of aluminium, GRP, plywood, steel & ferrocement. Also for protection of keels and rudders. High build epoxy primer and undercoat for use above and below the waterline.

HEMPEL'S UNDERWATER PRIMER is a fast drying underwater primer containing aluminium flakes. For use as a sealer onto old antifouling or as a tiecoat over an epoxy primed surface before antifouling. Suitable on glass fibre, wood and steel. For use on all areas below the waterline including keels. Application method: Brush/Roller/Paint pad/Spray

Hempel High Protect Two Part Epoxy Primer (replacing GelProtect SFE200) is a two-component, solvent-free, high-build epoxy for osmosis protection and treatment. Easy to apply with good tolerance to environmental conditions. Forms a hard, tough, water-resistant coating. For use as a primer below the waterline on boats made of glass fibre or steel. Prevention and repair of osmotic blistering in the glass fibre both above and below the waterline. Available in Cream 24700 or Grey 13700

Hempel/Blakes ia a quick drying, high opacity primer and undercoat providing excellent durability and surface stability in preparation for overcoating with single pack systems. Suitable for all substrates, especially steel, and as an undercoat for Brilliant Enamel and Yacht Enamel. For use above the waterline. Application: Brush / Roller / Spray Coverage: 11m2 per litre Thinners: No. 1

An anti-corrosive primer and tie coat for different substrates. Recommended for use as primer for antifouling on propellers and outboard engines on yachts. Fast drying, good adhesion to steel and other metals, re-coatable with the most common types of paint. Available in Stone Grey 12170.

International Interprotect Epoxy Primer ia a quick drying, easy to apply, two-part epoxy primer Offers excellent anticorrosive protection Can be used as an antifouling tie-coat over existing epoxy primers

International Perfection Two-Part Polyurethane Undercoat Paint is a high performance two-part polyurethane undercoat. Provides an excellent base for a long-lasting gloss finish Easy application, fast drying and easy sanding. Semi-gloss appearance

International Pre-Coat Undercoat for Toplac. Pre-Kote is easy to apply and the excellent obliteration characteristics means easy colour changing. Pre-Kote is designed around tough, flexible resins which means it is long lasting and easy to apply and rub down. It provides a smooth base for the finishing coat. Pre-Kote is suitable for all suitably primed wood, steel, alloy and GRP surfaces. Not suitable for permanently immersed areas. Colours: White or Blue/Grey

International Primocon Primer a quick drying, general purpose below waterline primer, ideal for metal keels and hulls prior to antifouling, or for use as a barrier/sealant between unknown or incompatible antifoulings.

VC Prop-O-Drev Primer is specially formulated for use with Prop-O-Drev on outdrives, outboard legs, propellers and sterngear. Aerosol ideal for painting awkward shapes . It offers excellent adhesion to properly prepared metal and factory enamelled surfaces.

Conventional one-part primer for use above the water. Quick drying, with anticorrosive properties. Pigments contain aluminium flake to provide an anti-corrosive protective barrier

Though durable undercoat that provides a perfect smooth and sandable base to maximize the performance and professional finish to our hull and topside paint. Easy to apply by brush roller or spray on all substrates above the waterline. Available Colours: White and Grey. The Grey Undercoat is ideal for dark topside colours.

Premier Multi-Purpose Metallic Antifouling & Yacht Keel Primer. Quick drying for use on all substrates above and below the water line. Excellent waterproofing and effective anti-corrosion properties also make this an ideal yacht keel primer. Ideal as a primer or barrier coat to antifouling all new hull substrates GRP, wood, steel, ferror cement, and aluminium or as a conversion over unknown antifouling.

SEAJET 015 Underwater Primer works as an excellent sealer/barrier coat over unknown, incompatible and Teflon based antifouling. It is quick drying and adheres well to subsequent coats. Characteristics: Quick drying, Excellent adhesion to subsequent coats, It forms a tough yet flexible film. Recommended as: Binder coat for old antifouling. Primer for antifouling. Main benefits: Quick drying. Excellent sealer/barrier coat over unknown, incompatible and teflon based antifouling.

Highly resistant antirust primer with extremely good adhesiveness performance. Indispensable to make all following paintings even and resistant. Antirust Grey Primer for Marine Engines. Fast drying and weather resistant. Apply initially to protect before applying TK Line Colorspray colour.