Topcoats
|
|
|
Hardtop XP is a high volume solids, glossy two-pack polyurethane topcoat with excellent gloss and colour retention. It is available in virtually any colour where a durable weather resistant finish is required in aggressive atmospheric temperatures. Hardtop XP is designed more for application by brush or roller, but can also be applied by air spray or high pressure airless spray with excellent results.
Finish: Semi Gloss
Coverage: 12.6m² / Litre
Application: Brush, Roller, Conventional Spray, Airless Spray
Thinners: Thinners No. 10
Primer: Penguard HB, Jotamastic
Suitable For: Aluminium, GRP, Steel
Mix Ratio: 10:1
Hardtop XP is available in any colour from the Jotun Standard, RAL K7 and British Standard colour charts (except for luminous and metallic colours). Some orange and yellow colour mixes may cost more due to the base required to mix it. If your colour choice is affected by this it will load the relevant page for you to make your selection on.
|
|
|
Hardtop XPL is a two component chemically curing aliphatic acrylic polyurethane coating. It has a matt finish with very good gloss retention. The product has good application properties with low dry spray. To be used as topcoat in atmospheric environments.
Please note that we are currently unable to mix some yellow and orange colours in Hardtop XPL. If you are unsure please get in touch before ordering.
Finish: Matt
Coverage: 7.3 - 14.5m² per litre
Application: Brush, Roller, Conventional Spray, Airless Spray
Thinners: Thinners No. 10
Primer: Penguard HB, Jotamastic
Suitable For: Aluminium, GRP, Steel
Mix Ratio: 10:1
Hardtop XPL is available in any colour from the Jotun Standard, RAL K7 and British Standard colour charts (except for metallic or luminescent colours).
|
|
|
Hardtop AX is a two-pack glossy polyurethane topcoat with excellent gloss and colour retention. It is suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments. Hardtop AX can be brushed or rolled and gives a glossy, durable finish. It offers high sag resistance, low level of spray dust, low odour and a consistent gloss. Hardtop AX has much better abrasion and chemical resistance that Hardtop XP.
Hardtop AX is available in any colour from the Jotun Standard, RAL K7 and British Standard colour charts. Some orange and yellow colour mixes may cost more due to the base required to mix it. If your colour choice is affected by this it will load the relevant page for you to make your selection on.
Finish: Glossy
Coverage: 9m² per litre
Application: Brush, Roller, Conventional Spray, Airless Spray
Thinners: Thinners No. 10
Primer: Penguard HB, Jotamastic
Mix Ratio: 4:1
|
|
|
Hardtop Flexi is a two component, high solid, flexible polyurethane coating with good gloss and colour retention. Hardtop Flexi bases are intermediates and need to be processed before use.
Hardtop Flexi can be used as a single coat system in atmospheric corrosivity classes C2 and C3. It can also be used as a topcoat in classes C2 - C4 and C5-I and C5-M on various primers and as a maintenance coating on old paint surfaces. Hardtop Flexi has a good impact resistance and painted objects can be stacked after a short drying time.
The product has good built in corrosion protection and is also suitable as a single product system for maintenance application when both corrosion protection and topcoat performance are desired.
Finish: Glossy
Coverage: 9m2 per litre
Application: Brush, Roller, Airless Spray
Thinner: Jotun Thinner No. 10
Suitable For: Steel, Aluminium, GRP
Primer: Jotamastic, Penguard HB.
Some orange and yellow colour mixes may cost more due to the base required to mix it. If your colour choice is affected by this it will load the relevant page for you to make your selection on.
|
|
|
A single pack semi-gloss acrylic topcoat with good hiding properties and colour retention. It can be used over the top of Vinyguard, Jotamastic and Penguard range of primers. A quick drying and suitable for use both internally and externally.
Pioner Topcoat is available in any colour from the Jotun Standard, RAL K7 and British Standard colour charts. It overcoats with future coats of Pioner Topcoat very well, without the need for rubbing down, ideal if you are going to be doing regular touch-ups.
Finish: Semi Gloss
Coverage: 8m2 per litre.
Application: Brush, Roller, Airless Spray
Thinner: Jotun Thinner No. 7
Primer: Single - Vinyguard, 2 Pack - Penguard & Jotamastic
Suitable For: Aluminium, GRP, Steel
|
|
|
Jotun Jotafloor Rapid Dry 5L.
Jotun Jotafloor Rapid Dry is a single pack alkyd coating. Rapid Dry is a fast drying floor paint and offers a durability that isn't usually associated with alkyd floor paints.
Jotafloor Rapid Dry is ideal for floors with light traffic and walkover.
Jotafloor Rapid Dry is designed for a range of floors with various levels of exposure It is designed for areas requiring a fast drying, easy to use, light duty floor coating where quick turn around is expected.
Recommended areas include exhibition halls, interior floors, concert and sports venues.
Add Jotun anti skid granules for a textured, non-slip surface.
Finish: Glossy
Coverage: 12m² per litre
Application: Brush, Roller, Airless Spray
Thinner: Jotun Thinner No7
Primer: Vinyguard, Jotamastic 87, Penguard HB
|
|
|
Pilot II is a glossy single pack alkyd (oil based) topcoat recommended for use either over an existing oil based topcoat, or over Vinyguard Silvergrey 88 primer or Alkyd Primer. Pilot II can be used on steel, wood or GRP. It is available in almost any colour. Pilot II may be applied by brush or roller. For best results, apply using conventional air spray.
Finish: Glossy
Coverage: 12m² per litre
Application: Brush, Roller, Airless Spray
Thinner: Thinners No. 2
Primer: Alkydprimer, Vinyguard 88
Suitable For: GRP, Steel, Wood
Pilot 2 is available in any colour from the Jotun Standard, RAL K7 and British Standard colour charts (except for luminous and metallic colours).
|
|
|
A quick drying high build acrylic self-priming finish.
Conseal Touch-up is a versatile and easy to use self-primer for multipurpose use either direct to steel and other metals or for use as a touch up coat.
Ideal for use as a deck paint with optional anti-skid granules
It is a single component, high build coating which can be tinted to a large colour range.
Finish: Semi Gloss
Coverage: 5m2 per litre
Application: Brush, Roller, Conventional Spray, Airless Spray
Thinner: Jotun Thinner No. 7
Some orange and yellow colour mixes may cost more due to the base required to mix it. If your colour choice is affected by this it will load the relevant page for you to make your selection on.
|
|
|
Jotun Easy Gloss is a high quality alkyd topcoat. It has a high gloss finish with very good levelling characteristics. It has excellent gloss and colour retention. It is easy to apply. It is fast drying. It has very good hiding power. To be used as a topcoat for aggressive atmospheric exposure. The product is suitable for both professional and consumer application.
We can mix Jotun Easy Gloss to any colour on the British Standard, RAL K7 Classic and Jotun Standard colour charts (except for metallic colours). If you know which specific colour you're after then please add it as a note during the checkout process, or send us a quick message after you have placed the order.
Finish: High gloss
Coverage: 10m² per litre
Application: Brush, roller, air spray
Thinner: Jotun Thinners No. 2
Primer: Jotun Easy Primer
Suitable For: GRP, Steel, Wood, Aluminium
Unfortunately we are unable to mix some yellow or orange colours in Jotun Easy Gloss.
International Danboline hard wearing coating for bilges, lockers, bulkheads and engine compartments. Chemical resistance to fumes, fuel and oil, High opacity bilge paint with excellent coverage, Cleans easily for reduced maintenance.
|
|
TK Line Colour spray. Nitro-combined spray fast drying for painting and quick retouch. Thanks to its high resistance to scratching, weathering and temperature up to 200 ° C, TK Colorspray became the professional reference for restoring paint on stems, stern drives, covers and marine engines. TK colors paints are available in the original colors of the most widespread brands of inboard and outboard marine engines.
 |
Once you've primed your boat it's ready to apply the topcoat! Please use the following handy guides to ensure that you're using the correct topcoat for your primer:
Jotun Typical Paint Systems Guide